APH31EA - AZURA Pump P 6.1L isocratic with 10 ml pump head (stainless steel), 862 bar, 2- channel degasser and 1 Channel Solvent Selection Valve

General information

  • Max. flow rate: 10 ml/min
  • Flow rate range: 0.001–10 ml/min
  • Flow rate increment: 0.001 ml/min
  • Maximum delivery pressure: [psi] 12500 psi
  • Maximum delivery pressure: [MPa] 86 MPa
  • Maximum delivery pressure: [bar] 862 bar
  • Pump head materials: Stainless Steel
  • Gradient: Isocratic
  • Leak Management: Yes
  • Wetted materials: GFP (graphite fiber reinforced PTFE), sapphire, ruby, Tefzel® (ETFC), FKM, PEEK, stainless steel, Zirconium oxide, Systec AF TM, PTFE
  • Pump features: Active pulsation compensation, RFID for automatic pump head detection, Integrated pressure sensor, Purge valve (manual), Leak management, Piston seal wash


    Detailed information

  • Best working conditions: 0.1 - 8 ml/min ml/min
  • Continuous working conditions: 0.1 - 4 ml/min
  • Flow rate accuracy: ± 0.25 %
  • Flow rate accuracy conditions: measured at 5–80 % of flow range, using ethanol
  • Flow rate precision: ≤ 0.04 % RSD or 0.008 min SD (whichever is greater)
  • Flow rate precision conditions: based on the retention time at constant room temperature
  • Degasser: Yes
  • Solvent selection valve: Yes Pulsation: < 2 % Amplitude (typically: < 1.3 %) or < 3 bar (0.3 MPa), whatever is greater, at 1 ml/min ethanol, at all pressures > 10 bar (1 MPa, 147 psi)
  • Pulsation compensation: Active pulsation compensation
  • Active piston seal wash: Yes
  • Piston seal washing: Yes
  • System protection: Soft start, Pmin und Pmax are programmable Pump Outlet thread: Female UNF 10-32 (coned)
  • Pump head inlet (standard): UNF 1/4-28 Thread (flat bottom)
  • Pump head outlet (standard) UNF 10-32 Thread


    Communication

  • Interfaces: LAN, Pin header connectors (Analog IN, Start In, Error IN)
  • Control: LAN, Analog and event control, Mobile Control
  • Analog inputs: Flow rate, 0–10 V via pin header connectors
  • Analog outputs: 8 event outputs (TTL, OC, Relais) and 24 V


    General

  • Power supply: 100 - 240 V; 50 - 60 Hz
  • Dimensions: 361 mm x 208 mm x 523 mm (W × H × D)
  • Weight: 11.5 kg
  • Leak sensor: Yes
  • Ambient conditions: 4–40 °C (39–104°F) Air humidity: below 90 % humidity, non condensing


    The AZURA® Pump P 6.1L uses technology to overcome the challenges of pumping LC solvents at high pressure and high flow rates. This pump is designed to fulfill the needs for high pressure and low pressure mixing tasks. The pump can deliver flow in the range of 0.001 – 50 ml/min at pressures up to 1000 bar (depending on model). The AZURA® binary pump contains two identical high pressure pumps, a 2 × 2-channel inlet solvent selection valve and the new developed AZURA® mixer, a low-volume mixing device. The AZURA® quaternary pump contains one high pressure pump and an integrated LPG mixing block with a 4 channel inlet solvent selection valve and the new developed AZURA® mixer, a lowvolume mixing device. The integrated degasser and AZURA® inline filter are completing the analytical AZURA® HPLC pump and turn this pump into a working horse in the lab


    OTHER PUMP MODELS ARE AVAILABLE ON REQUEST - Please contact our sales department to discuss your specific requirements.