APF45PA - AZURA Pump P 8.1L (UHPLC) with 5 ml pump head (stainless steel), degasser, mixer, automated purge valve
General information
Max. flow rate: 5 ml/min
Flow rate range: 0.001-5mL
Flow rate increment: 0.001 ml/min
Maximum delivery pressure: [psi] 18,000 psi
Maximum delivery pressure: [MPa] 124 MPa
Maximum delivery pressure: [bar] 1240 bar
Pump head materials: Stainless Steel
Liquid temperature range: 4−60 °C (39.2−140 °F)
Gradient: High pressure gradient (binary)
Leak management: Yes
Wetted materials: GFP (graphite fiber reinforced PTFE), sapphire, ruby, stainless steel, Zirconium oxide, DLC (Diamond-like carbon), Vespel®
Pump features: Active pulsation compensation, RFID for automatic pump head detection, Integrated pressure sensor, Leak management, Piston seal wash, Purge valve (automatic)
Detailed information
Flow rate accuracy: ± 0.25 %
Flow rate accuracy conditions: measured at 1 ml/min at 1200 bar with water
Flow rate precision: ≤ 0.0.04 or 0.008 min SD
Flow rate precision conditions: whichever is greater
Gradient range: 0–100 % in 0.1 % increments
Gradient accuracy: ± 0.3 %
Gradient precision: ≤ 0.1 % RSD or 0.01 min SD
Gradient minimum increment: 0.1%
Mixing volume: 50 µl
Pump type: Analytical UHPLC pump
Degasser: Yes
Solvent selection valve: 2 x 2 channels
Pulsation compensation: Active pulsation compensation
Active piston seal wash: Yes
Piston seal washing: Yes
System protection: Soft start, Pmin und Pmax are programmable
Pump Outlet thread: Female UNF 10-32 (coned)
Pump head inlet (standard): UNF 1/4-28 Thread
Pump head outlet (standard): UNF 10-32 Thread
Communication
Interfaces: LAN, Pin header connectors (Analog IN, Start In, Error IN)
Control: LAN, Analog and event control, Mobile Control
Analog outputs: 8 event outputs (TTL, OC, Relais) , 5 V and 24 V constant
General
Power supply: 100 - 240 V; 50 - 60 Hz Maximum power consumption 310 Watt
Dimensions: 361 mm x 208 mm x 523 mm (W × H × D)
Weight: 26.7 kg
Leak sensor: Yes
Ambient conditions: 4–40 °C (39.2–104 °F) Air humidity below 90 %, non-condensing
The new AZURA® P 8.1L UHPLC pump offers a maximum delivery pressure of 124 MPa/1240 bar and a flow rate range up to 5 ml/min for ultra-fast and high-resolution applications.
The adaptive pulsation compensation of the pump is independent of flow rate, backpressure, and eluent type through real-time eluent compressibility monitoring and variable piston stroke. Together with the ultra-precise piston movement thanks to KNAUER’s proprietary advanced piston drive technology, this results in outstanding flow reproducibility at any working conditions. The pump also features a 2-channel internal degassing unit, a 2x2 channel solvent selection valve, and a low dwell-volume eluent mixer.
Developed with innovative technology and decades of continuous improvements the AZURA® P 8.1L UHPLC pump enters a new level of performance and durability. With a high level of in-house component production KNAUER achieves an industry-leading level of manufacturing precision. This results in unmatched piston seal life and system uptime.
OTHER PUMP MODELS ARE AVAILABLE ON REQUEST - Please contact our sales department to discuss your specific requirements.