APC40FA - BlueShadow Pump 40P with 50 ml pump head (stainless steel), pressure sensor, automatic back seal washing, accessories included
For HPLC and dosing applications
General information
Max. flow rate: 50 ml/min
Flow rate range: 0.01 - 50 ml/min
Flow rate increment: 0.001 ml/min
Maximum delivery pressure: [psi] 4350 psi
Maximum delivery pressure: [MPa] 30 MPa
Maximum delivery pressure: [bar] 300 bar
Pump head materials: Stainless Steel
Maximum viscosity: 100 mPa·s
Liquid temperature range: 4−60 °C (39.2−140 °F)
Gradient: Isocratic
Leak management: No
Wetted materials: GFP (graphite fiber reinforced PTFE), sapphire, ruby, PEEK, Zirconium oxide
Pump features: Piston seal wash, Purge valve (manual), RFID for automatic pump head detection, Standalone control and programming, Integrated pressure sensor, Active pulsation compensation
Detailed information
Best working conditions: 0.1 - 40 ml/min
Continuous working conditions: 0.1 – 20 ml/min
Flow rate accuracy: ± 1%
Flow rate accuracy conditions: measured at 5 - 80% of flow range using ethanol
Flow rate precision: < 0.1 % RSD
Flow rate precision conditions: based on retention time at constant room temperature
Degasser: No
Pulsation: < 2 % amplitude (typically < 1.3 %) or < 0.3 MPa (3 bar), whatever is greater, at 1 mL/min ethanol, at all pressures> 1 MPa (10 bar, 147 psi).
Piston seal washing: Active
System protection: soft start, Pmin and Pmax are programmable
Pump Outlet thread: Female UNF 10-32 (coned)
Pump head inlet (standard): UNF 1/4-28 Thread
Pump head outlet (standard): UNF 10-32 Thread
Communication
Interfaces: LAN, Pin header connectors (Analog IN, Start In, Error IN), LCD Display
Control: LAN, Analog and event control
Analog inputs: Flow rate, 0 - 10 V via pin header connectors
Analog outputs: 8 event outputs (TTL, OC, Relay) and 24 V
General
Power supply: 100 - 240 V; 50 - 60 Hz Maximum power consumption 40 Watt
Dimensions: 242 mm x 165 mm x 399 mm (W × H × D)
Weight: 5.1 kg
Leak sensor: No
Ambient conditions: 4–40 °C (39–104°F) Air humidity: below 90 % humidity, non condensing
The BlueShadow Pump 40P was designed to provide exceptionally precise and reliable solvent delivery for a wide range of HPLC and dosing applications. Exchangeable pump heads with maximum flow rates of 10 and 50 ml/min cover a wide range of high-pressure dosing tasks. Practically pulse-free flow is achieved by our enhanced smart drive control which actively prevents pressure ripple instead of just dampening it. The improved design ensures a low dead volume and the inline filter protects your column from clogging and pressure build-up. Pump heads for high-temperature applications enable solivent delivery at up to 120 °C. Minimize temperature gradients by adding a pump head heater and insulation sleeve.
For additional technical specifications, please view the downloadable brochure.
OTHER PUMP MODELS ARE AVAILABLE ON REQUEST - Please contact our sales department to discuss your specific requirements.