APD60KB - BlueShadow Pump 80P with 100ml pump head, titanium inlays, automatic back seal washing, accessories included
General information
Max. flow rate: 100 ml/min
Flow rate increment: 0.01 ml/min
Maximum delivery pressure: [psi] 5800 psi
Maximum delivery pressure: [MPa] 40 MPa
Maximum delivery pressure: [bar] 400 bar
Pump head materials: Titanium
Maximum viscosity: 1000 cP
Liquid temperature range: 4−60 °C (39.2−140 °F)
Gradient: Isocratic
Leak management: -
Wetted materials: FFKM, GFP (graphite fiber reinforced PTFE), ruby, sapphire, Titanium, aluminum oxide (Al2O3), PEEK, Zirconium oxide
Pump features: Piston seal wash, RFID for automatic pump head detection, Active pulsation compensation, Standalone control and programming, Integrated pressure sensor
Note: Pressure sensor membrane made of stainless steel; limited wetting in fluidic path
Detailed information
Best working conditions:1 - 80 ml/min
Continuous working conditions: 1 – 40 ml/min
Flow rate accuracy: ± 2%
Flow rate accuracy conditions: measured at 5 - 50% of flow range using ethanol/water 10:90
Flow rate precision: < 0.1 % RSD
Flow rate precision conditions: measured at 5 - 50 % of flow range using ethanol/water 10:90
HPG gradient accuracy: ± 2 % (5 - 95 %, measured at 5 - 50 % of flow range, water/caffeine tracer)
HPG gradient precision: 1 % RSD, based on retention time at constant room temperature
LPG gradient accuracy: ± 3 % (5 - 95 %, measured at 5 - 50 % of the flow range, water/caffeine tracer)
LPG gradient precision: 2 % RSD, based on retention time at constant room
Active piston seal wash: +
Piston seal washing: +
Pump Outlet thread: Female UNF 10-32 (coned)
Pump head inlet (standard): M8 x 1 (flat bottom)
Pump head outlet (standard): M8 x 1 (coned)
Communication
Interfaces: keypad; LAN; RS-232; pin header connectors (events control and remote control)
Control: stand-alone via keypad; digital via LAN or RS-232; analog via remote control pin header connector
Inputs: Flow rate
Outputs: Pressure, 8 event outputs (TTL, OC, Relay)
Analog inputs: 0-10 V
Analog outputs: 1, 2 or 5 V
General
Power supply: 100 - 240 V; 50 - 60 Hz
Dimensions: 242 mm x 191 mm x 407 mm (W × H × D)
Weight: 13.2 kg
Leak sensor: No
Ambient conditions: temperature range: 10–40 °C; 50–104 °F; air humidity: below 90 % humidity (non condensing)
Note: Acessory Kit includes PTFE tubing and PETP bushing/sealing ring for standard applications. For applications with aggressive solvents, PEEK or stainless steel parts are available
The Preparative Pump 80P delivers stable and precise solvent flow for semi-preparative as well as preparative HPLC applications. By adding one or more additional pumps, binary, ternary or even quaternary high-pressure gradient systems can be easily configured. The pump can also be equipped with a binary or ternary gradient valve block to configure cost-effective low-pressure gradient systems. Exchangeable pump heads for flow rates up to 1 000 ml/min and pressures up to 40 MPa make it possible to easily optimize the pump to changing performance requirements and allow simple maintenance. Available in stainless steel or biocompatible titanium versions, the pump heads enable a wide range of applications.
OTHER PUMP MODELS ARE AVAILABLE ON REQUEST - Please contact our sales department to discuss your specific requirements.