Hamilton Microlab 610-DIS Single Channel Diluter/Dispenser with Basic Controller
The ML610-DIS ships complete with the Concorde Hand Probe, Universal Valves, Fill/Dispense Tubing, Accessory Holder, country specific Power Cord, and the choice of one syringe. If no syringe is selected at the time of the order, a 1.0 syringe will be included.
Bubble Free Prime syringe
For any syringe pump, the key to achieving the most accurate dispenses is eliminating all air from the fluid path. Traditional syringes trap approximately 50µl of air between the tip of the syringe and the valve, which makes small syringes difficult to prime.
The Bubble Free Prime (BFP) syringe has a conical plunger tip that extends through the threaded termination and into the valve. This unique design expels the air from the syringe and valve decreasing the number of priming cycles required.
Universal Valves
The high precision Universal Valves of the ML600 are robust and flexible. The innovative fluid logic enables the same universal valve to be used in all MICROLAB 600 dispensing and diluting applications.
Simply interchange the valve plugs and tubing to achieve the required configurations.
Technical Specifications:
Power Rating: 24 VDC, 2.5A
Power Requirements: 100-240V 1.5A max 50-60 Hz
Volume Left Syringe: Custom Volume Left Syringe
Program Memory: One program stored in memory while power is on
Syringe Drive Mechanism: Stepper motor driven high precision lead screw with encoder
Syringe Pump Specifications:
Single and Dual Syringe Pump
Accuracy: +/- 1%
Precision: +/- 0.2%
Flow Rate: 0.003 - 6000µl/second (depending on the syringe that is selected)
Syringe Resolution: 0.02% of the nominal syringe volume
Compatible Syringes: 10, 25, 50, 100, 250, 500µl, 1, 2.5, 5, 10, 25, and 50ml
Fluid Path: Borosilicate, PTFE, CTFE
Communication Type: Ethernet, 10/100 BASE-T
Communication Protocol: .NET 2.0 Application Programming Interface (API)
Pump Memory: One method stored in non-volatile memory
Calibration: Factory tested and traceable to N.I.S.T. standards
Certifications: CE, CSA
Power Rating: 24 VDC, 2.5A
Dimensions: 7 x 5.5 x 10.5 inch (177.8 x 139.7 x 266.7mm)
Weight: 13 lbs (5.9 kg)
Controller Specifications:
MICROLAB 600 Controller
Screen Size: 5.7 inch (15 cm diagonal)
Screen Resolution: 640(H) x 480(V) pixels
Tilt Positions: 5 positions from 90° to flat
Mounting Options: On top of the Syringe Pump, Bench Top, or Wall Mount
Program Memory: I Method
Communication Type: Ethernet, 10/100 BASE-T
Power rating: 24 VDC, 2.5A
Dimensions: 2.25 x 6.5 x 7 inch (57.2 x 165.1 x 177.8mm in down position)
Weight: 1.9 lbs (0.86 kg)