Model 500 Moisture TrapThe Model 500 Moisture Trap contains of molecular sieve 5A and reduces moisture to less than 1 ppm at most instrument flow rates of 2 L/min.
Internal 20 µm frits at each end prevent particle contamination of analytical instruments.
Supplied with 1/4" Brass Compression fittings
The Model 500 will remove water from over 20 standard cylinders of compressed air. The trap can be regenerated by baking under helium flow at 200°C for 4 hours, venting to the hood.
Dimensions: 5 x 35cm with fittings.
The trap is shipped filled with high-purity helium.
