Also Available:
Z-Pure™ Gas Purifiers and Filters
PDF DOWNLOAD ADVANCED FILTER SYSTEM
AFS Gas Purifiers and Filters - Advanced Filter System
The high-capacity gas purifying system that removes contaminants from inert gases and hydrogen. The AFS Purifiers can be expected to supply multiple GC Installations for an extended period of time depending on the laboratory environment.
The two part system includes a small stainless steel manifold and a high capacity purifier cartridge. The manifold mounts to a laboratory wall or bench with brackets included in the installation kit and connects to the gas lines with stainless steel compression fittings.
The AFS 1 PurifierCartridge removes oxygen, moisture and hydrocarbons (greater than C4) from inert gases and hydrogen. It contains a high sensitivity oxygen and moisture indicator. When the cartridge is depleted, the oxygen indicator changes from GREEN to GREYand the moisture indicator changes from BLUE to BROWN.
PolyGas AFS Purifier I Cartridge is a high capacity Non-Hazardous purifying system that removes oxygen, moisture and hydrocarbons (greater than C4) from inert gases and hydrogen. It contains a high sensitivity oxygen and moisture indicator. When the cartridge is depleted, the oxygen indicator changes from GREEN to GREY and the moisture indicator changes from BLUE to BROWN.
The AFS II Purifier Cartridge removes moisture and hydrocarbons (greater than C4) from air, inert gases and hydrogen. It contains a high sensitivity moisture indicator. When the cartridge is depleted, the moisture indicator changes from BLUE to BROWN.
The AFS III Purifier Cartridge removes moisture from inert gases and hydrogen. It contains a high sensitivity moisture indicator. When the cartridge is depleted, the moisture indicator changes from BLUE to BROWN.
ADVANCED FILTER SYSTEM AFC COMPLETE KIT AFC MANIFOLD UNIT
ALSO AVAILABLE
ZPure™ LS H2O Filters for use with ASTM D6550 and ASTM D5186 using SFC
The H2O filter for use with ASTM D6550 and ASTM D5186 using SFC
The ZPure H2O Filter removes moisture from inert gases, He, Ar, N2, H2, methane and clean dry air (CDA) to low ppb levels, with very high capacity. It is recommended for any application that requires ultra-dry gas, and is available in 130cc and 475cc stainless steel cylinders with standard 1/4” and 1/8” brass and stainless steel compression fittings.
ASTM D6550 and ASTM D5186 using Supercritical Fluid Chromatography has been approved as an alternative to FIA ASTM D1319 standard test method for Hydrocarbon Types in Liquid Petroleum Products. This filter was manufactured with molecular sieve 3A by customer request for use with a Supercritical Fluid Chromatograph.
Moisture Removal for Specialized Applications
- CO2 purification for SFC - In the petroleum industry, both the Environmental Protection Agency (EPA) and California Air Resources Board (CARB) have approved ASTM D6550 and ASTM D5186 for final product release of gasoline and diesel fuels. In this type of application, the reduced heating of 3A is expected to reduce desorption of already bound moisture, protecting sensitive and expensive columns.
- Mixed source gas - Purifiers should not be used to remove water from individual gas samples intended for analysis; some proportionation may occur. Gas purifiers typically use either molecular sieve 5A or 13X adsorbents to remove water from gas streams. These are beneficial for carrier gases used with GC or GC/MS, because in addition to water they also remove many other common contaminants. (“5” and “13” refer to the adsorbent’s pore diameter in angstroms.) In some applications, however, 3A molecular sieve with smaller pore size may be preferred. It removes water yet excludes almost all larger molecules including CO2, the carrier used in Supercritical Fluid Chromatography (SFC). Since CO2 is excluded there is no significant temperature rise on installation, due to heat of adsorption, which may occur with 5A or 13X purifiers.
ZPure LS H2O Filter, 130cc, 1/8" S/S Compression Fittings, with Molecular Sieve 3A |
|
ZPure LS H2O Filter, 475cc, 1/8" S/S Compression Fittings, with Molecular Sieve 3A |
|
ZPure LS H2O Filter, 475cc, 1/4" Brass Compression Fittings, with Molecular Sieve 3A |
|
ZPure LS H2O Filter, 475cc, 1/4" S/S Compression Fittings, with Molecular Sieve 3A |
|
CONTACT US
Tel: +44 (0) 151 649 4000
Email: marketing@greyhoundchrom.com
FOLLOW US
YOU MAY ALSO BE INTERESTED IN OUR NEWSLETTER